asics trainers tea cozy IIITightly woven

Posted by asicstrainers - August 14, 2015

tea cozy III

Tightly woven fabric for lining and outside. The circumference is important, because your tea cozy must be much bigger around than a flat measurement might indicate. Divide the circumference by 2 and add 2 inches. This gives you so asics trainers me ease plus seam allowances. This is your fabric width, write that number down.

Measure Over teapotMeasure over your teapot. Start at the table on the front, over the lid and down to the table on the back side. Divide measurement by 2 and add 3 inches. That’s the height for all pieces, write it down!

Example: My “over” measurement is 10. Divide by two for 5. Add 3 for 8. Pattern height is 8 inches.

Draw a patternI enjoy drawing directly onto my fabric, since most every cozy will be custom made for its pot. If you prefer, draw your pattern on paper first.

For my patterns, I just drew a rounded shape with a flat bottom.

Ste asics trainers p 3: Embellish your fabric as desired. I downloaded my design from Tea 4 2 Catherine’s Stitch N Thyme

If you choose to embroider, you might want to layer your batting underneath your fabric and embroider that along with the fabric. Use your own best judgement I’m new at embroidery!

Stitch the tube in placeIf you made a paper pattern, use it to cut

Stitch close to edge with zipper foot tPlace the filler inside the strip and sew close to it with your zipper foot. (Don’t be tempted to skip this step!)

Press itIf using piping, attach piping to outer edge of cozy, raw edges outward. Stitch in place with zipper foot.

I stitched my piping to the front piece of the cozy through the batting.

Step 7: Make a handle for the top of the cozy. Fold it into a triangle, then fold each “wing” of the triangle down to make a square. Press, then stitch the ends down to hold it in place.

Pin handle on topBaste or pin the handle in place at the top of the cozy. Pin to the back piece.

B asics trainers asting is safer. I had to redo this one because it shifted when I sewed it down!

Step 9: Layer front and back pieces and pin.

Layer pieces and pin in placeLooking down on this, I’ve got batting, fabric (with piping and handle in place) fabric, then batting again.

Stitch the pieces togetherWith front side up, use the piping seam as a guide for stitching a 1/2″ seam. After you sew, turn the cozy right side out and press lightly.

Sew the liningSew your lining pieces together around the curved edge. Leave a 3 or 4 inch opening at top for turning later.
asics trainers

Pin lining to cozyPin the lining to the cozy, right sides together. Stitch the lower edge in a 1/2″ seam.

In:
Comments are Closed on this Post.